Publications

Adam, Kosik (2024): Risk assessment of prospection and exploration procedures. Vortrag auf dem Workshop on Geothermal Exploration bei BfE in Itingen

Adam, Kosik (2024): Risk assessment of prospection and exploration procedures. Vortrag auf dem Seminar von Computational Geosience, Geothermics and Reservoir Geophysics, RWTH Aachen

Gottinger, Michael; Notari, Nicola; Kranz, Samuel; Dutler, Samuel; Vetsch, Robin; Pittorino, Tindaro; Würsch, Christoph; Piai, Guido (2024): Microwave Reflection Model for Human Respiration Based on a Circular Membrane. IEEE Microwave and Wireless Technology Letters, vol. 34, no. 5, pp. 568-571, 10.1109/LMWT.2024.3385482

Ballester, Manuel; Almudena, Matito; Marquez, Emilio Jose; Bass, John; Würsch, Christoph; Willomitzer, Florian; Katsaggelos, Agellos K. (2024): Review and Novel Formulae for Transmittance and Reflectance of Wedged Thin Films on absorbing Substrates. IOP Publishing Ltd. iopscience.iop.org/article/10.1088/1361-6501/ada305

Ballester, Manuel; Marquez, Almudena P.; Lopez-Tapia, Santiago; Fernandez, Susana; Bass, John; Minkov, Dorian; Würsch, Christoph; Willomitzer, Florian; Marquez, Florian; Katsagellos, Agellos K. (2024): Enhancing the Swanepoel Method: Precise Envelope Detection of Thin-Film Transmission Spectra, Optics Express

Egger, Christian; Simon, Nicola; Lüchinger, Marco; Kern, Kerstin; Schreiner, Michael, Tillmann, Wolfgang; Gibmeier, Jens (2024): Experimental and numerical analysis of residual stresses induced by the manufacturing process of longitudinal welded tubes. The Journal of Strain Analysis for Engineering Design. doi.org/10.1177/03093247241234988

Egger, Christian (2024): Charakterisierung und Modellierung von Werkstoff und Schweissnahtqualität für das Hochfrequenz-Induktionsschweissen von Rohren. Werkstofftechnologische Schriftenreihe 28. Essen: Vulkan-Verlag GmbH. ISBN 978-3-8027-8835-2

Luginbühl, Micha; Gross, Micah; Lorenzetti, Silvio; Graf, David; Bünner, Martin (2023): Identification of Optimal Movement Patterns for Energy Pumping. Sports 11-2 (2023) 31.

Kosík, Adam; Stojanovic, S. (2023): Numerical Simulations on the Performance of Optical-Acoustic Sensors of Minimal Dimensions. The International Journal of Multiphysics, 17(1), 105-124. doi.org/10.21152/1750-9548.17.1.105

Trémuel, Philipp Gerard; Gavves, Efstratios; Würsch, Christoph; Frick, Klaus; Vetsch, Robin (2023): Parameter-free Neural Field-based Optimal Design of Nonuniform Transmission Lines. 30th IEEE International Conference on Electronics, Circuits and Systems (ICECS), Istanbul, Turkiye, 2023, pp. 1-4, 10.1109/ICECS58634.2023.10382765.

Erne, Sandro; Scheger, Georg; Wiedemair, Wolfgang; (2023): Numerical and experimental investigation of surface-stabilized combustion in a gas-fired condensing boiler. Results in Engineering 17:100738, https://doi.org/10.1016/j.rineng.2022.100738

Wolfer, Claudio; Gwerder, Damian; Martinez-Garcia, Jorge; Janoske, Uwe; Schuetz, Philipp; Schreiner, Michael (2023): Monitoring the water distribution in meat upon freezing with X-ray computed tomography, Published by NDT.net, doi.org/10.58286/28156

Wiesinger, Simon; Wiedemair, Wolfgang (2023): Modelling of Acoustically Induced Rapid Mixing Processes in Microchannels Using Acoustic Streaming. Comsol Konferenz 2023, ISBN 978-1-7364524-1-7

Gnos, Tobias; Besserer, Reto; Mermoud, Yves; Reymond, Serge; Bourdelle, Pierre-François; Kejik, Pavel; Würsch, Christoph; Huber, (2023): Active Compensation of Non-Orthogonality in CMOS Vertical Hall Based Angle Sensors. IEEE SENSORS, Vienna, Austria, 2023, pp. 1-4, 10.1109/SENSORS56945.2023.10325043.

Bünner, Martin; Berthold, M.; Carelli, Erich; Zumbrunn, C. (2022): Skalierbarer Energie-Optimierer mit KI. bulletin.ch 5

Hänggi, P.; Stürwald S.; Bünner, Martin (2022): Computer-Aided Recipe Optimization of Concrete. EACAF Conference Singapore.

Egger, Christian; Lüchinger, Marco; Schreiner, Michael; Tillmann, Wolfgang (2022): Numerical Simulation of Tube Manufacturing Consisting of Roll Forming and High-Frequency Induction Welding. Materials 2022, 15, 1270. doi.org/10.3390/ma15031270

Egger, Christian; Kroll, Martin; Kern, Kern; Steimer, Yannik; Schreiner, Michael; Tillmann, Wolfgang (2022): Experimental Investigation of Temperature and Contact Pressure Influence on HFI Welded Joint Properties. Materials 2022, 15, 3615. doi.org/10.3390/ma15103615

Buhmann, Marco; Carelli, Erich; Egger, Christian; Frick, Klaus (2022): Point cloud based tool path generation for corrective machining in ultra-precision diamond turning. Int J Adv Manuf Technol 120, 6891–6907 (2022). doi.org/10.1007/s00170-022-09033-2

Kosik, Adam; Stojanovic, G. (2022) Numerical Simulations on the Performance of Optical-Acoustic Sensors of Minimal Dimensions. Multiphysics, 15-16 December 2022 Oslo, Norway

Härdi, Simon; Schreiner, Michael; Janoske, Uwe (2021): On a new algorithm for incorporating the contact angle forces in a simulation using the shallow water equation and smoothed particle hydrodynamics. Computer&Fluids.

Blick, Christian; Freeden, Willi; Nashed, M. Zuhair; Nutz, Helga; Schreiner, Michael (2021): Inverse Magnetometry (ISBN: 978-3-030-79508-5) Inverse Magnetometry, SpringerLink

Stadelmann, Thilo; Keuzenkamp, Julian; Grabner, Helmut; Würsch, Christoph (2021): The AI-Atlas: Didactics for Teaching AI and Machine Learning On-Site. Online and Hybrid Educ. Sci. 11, no. 7: 318. doi.org/10.3390/educsci11070318

Vetsch, Robin; Egger, Christian; Würsch, Christoph (2021): Fertigungsqualität über maschinelles Lernen zuverlässig und in Echtzeit bestimmen, TwinCAT Machine Learning für eine intelligente Bolzenanker-Produktionslinie. PC control - The New Automation Technology Magazine Nr. 2. p.24-25

Lüchinger, Marco (2021): Charakterisierung und Modellierung von Werkstoff und Reibung für die FE-Simulation des Rohrziehens. Werkstofftechnologische Schriftenreihe 22. Essen: Vulkan-Verlag GmbH. ISBN 978-3-8027-8829-1

Buhmann, Marco; Carelli, Erich; Egger, Christian; Roth, Raul; Liebrich, Thomas (2021): Investigation on probe positioning errors affecting on-machine measurements on ultra-precision turning machines. Procedia CIRP doi.org/10.1016/j.procir.2020.10.004

Härdi, Simon; Schreiner, Michael; Janoske, Uwe (2020): Simulating thin film flow using the shallow water equations and smoothed particle hydrodynamics. In: Computer Methods in Applied Mechanics and Engineering 358, S. 112639. DOI: 10.1016/j.cma.2019.112639.

Buhmann, Marco; Roth, Raoul; Liebrich, Thomas; Frick, Klaus; Carelli, Erich; Marxer, Michael (2020): New positioning procedure for optical probes integrated on ultra-precision diamond turning machines. CIRP Annals, Volume 69, Issue 1, pages 473-476.

Buhmann, Marco; Carelli, Erich; Egger, Christian; Roth, Raoul; Liebrich, Thomas (2020): Investigation on probe positioning errors affecting on-machine measurements on ultra-precision turning machines. 9th CIRP Conference on High Performance Cutting.

Bünner, Martin (2019): Optimierung für Wirtschaftsingenieure. Wiesbaden: Springer Gabler. in Springer Fachmedien Wiesbaden GmbH (Schriften zum Wirtschaftsingenieurwesen).

Härdi, Simon; Schreiner, Michael; Janoske, Uwe (2019): Enhancing smoothed particle hydrodynamics for shallow water equations on small scales by using the finite particle method. In: Computer Methods in Applied Mechanics and Engineering 344, S. 360–375. DOI: 10.1016/j.cma.2018.10.021.

Würsch, Christoph; Carelli, Erich (2019): Coffee Extraction – Approaching it from an engineering side. Food: Soft Matter – Hard Computation – Exciting Science: How processes can be approached through analysis and modelling. 6. Treffen der Innovationsgruppe Kaffee. Wädenswil, 02.07.2019.

Würsch, Christoph; Carelli, Erich; Gstöhl, Daniel; Frei, Stefan; Mishra, Kim; Braun, Peter; Egli, Rudenz (2019): Ein kontrollierter Prozess für die Produktion von Margarine höchster Qualität. Lebensmittelindustrie.

Bucur, Paul Alexandru; Hungerländer, Philipp; Frick, Klaus (2019): Quality classification methods for ball nut assemblies in a multi-view setting. Mechanical Systems and Signal Processing

Wiedemair, Wolfgang; Tukovic, Zeljko; Jasak, Hrvoje; Poulikakos, Dimons; Kurtcuoglu, Vartan (2017): The breakup of intravascular microbubbles and its impact on the endothelium. Biomechanics and Modeling in Mechanobiology 16(2): 611-624, DOI: 10.1007/s10237-016-0840-z

Schwyn Thöny, Silvia; Wüthrich, Silvan; Padrun, Marco; Burgunder, Matthias; Gnos, Tobias; Meier, Thomas; Schreiner, Michael; Wuersch, Christoph; Buser, Rudolf (2013) Simulation and Optimization of Distribution Shields: Improved Uniformity and Material Utilization. Optical Interference Coatings2013, paper WC.4

Brzezniak, Zdzislaw; Carelli, Erich; Prohl, Andreas (2013) Finite-element-based discretizations of the incompressible Navier–Stokes equations with multiplicative random forcing. IMA J. Numer. Anal. 33(3):771-824

Pietkiewicz, Andrzej; Gnos, Tobias; Bünner, Martin; Schenk, Kurt (2013): Novel Inductive Current Splitter/Merger for Low Harmonics Three-Phase Rectifiers. PCIM Europe 2013:295-302

Carelli, Erich; Hausenblas, Erika; Prohl, Andreas (2012): Time-splitting methods to solve the stochastic incompressible Stokes equation. SIAM J. Numer. Anal. 50(6):2917–2939

Carelli, Erich; Prohl, Andreas (2012): Rates of convergence for discretizations of the stochastic incompressible Navier-Stokes equations. SIAM J. Numer. Anal. 50(5):2467–2496

Carelli, Erich; Müller, Alexander; Prohl, Andreas (2012): Domain decomposition strategies for the stochastic heat equation. Int. J. Comput. Math. 89 (18):2517–2542